Automobilia Ladenburg

Marcel Seidel Auctions

www.automobilia-ladenburg.de - info@automobilia-ladenburg.de - 0049 6203 95 77 870

No. 4079 PORSCHE
2 heat exchanger suitable for Porsche 356, reworked, good condition

No. 4080 MASERATI
a pair of camshafts for Maserati Citroen SM 2.7 L engine, for refurbishing

No. 4081 PORSCHE
3-part coupling for Porsche 906, the coupling was modified, good condition

No. 4083 PORSCHE
2 intake grills for Porsche 356 B Carrera, original, good condition with traces of usage, rare

No. 4084 MOMO
steering wheel Momo Prototipo from 1980, new, very rare, with a diameter of 35 cm

No. 4085 MOMO
steering wheel Momo Prototipo (perfect reproduction), with a diameter of 36 cm, very good condition

No. 4086 PORSCHE
mixed lot of 2 Fuchs rims 7 x 15 with tires (tires not more usable), part number 911.361.020, otherwise good condition

No. 4087 PORSCHE
mixed lot of 2 Fuchs rims, 8 x 15, part number 911.361.020, very good condition

No. 4088
mixed lot of 20 spark plugs for Porsche racing engines with small thread, type CR Electrode X290T17, spark plugs boxed as new, condition as good as new

No. 4089
2 original ignition switches for Porsche, among it e.g. 906, 907, 908, 910, 917, New Old Stock, very rare, good condition

No. 4090 VDO
air gauge/clock for Porsche 911, good used condition

No. 4091 PORSCHE
mixed lot of 2 bucket seats made of fiberglass for Porsche 906/910

No. 4092 PORSCHE
wooden box, Porsche from the races of the '60s, sizes 65 x 33 x 35 cm, absolutely rarity

No. 4093 PORSCHE
mirror for Porsche type 911/F-model, 1973, original, good condition

No. 4094 PORSCHE
mixed lot of 4 panels for rubber strips for Porsche 911 G-model, good used condition

No. 4095 PORSCHE
valve chamber cover, suitable for Porsche 928, with the part number 928.104.461, condition as good as new

No. 4096 PORSCHE/BILSTEIN
original car jack for Porsche 911, used condition

No. 4097 PORSCHE
mixed lot of 4 pair of various seat rails for Porsche 911, used condition

No. 4098 PORSCHE
original dashboard for Porsche turbo 3 litre, with tears, in need of restoration

No. 4099
mixed lot of 2 brake discs for Porsche 911 RSR, with a diameter of 30 cm, thickness 31 mm, used condition

No. 4100 PORSCHE
oil cooler gear unit, suitable for type 915, part number 951.207.309.02, used condition

No. 4101
demonstration -cutaway model of a dissimila axle VA-axle drive with helically toothed driving gear, with 2 drive shafts with flanges and unobstructed view to the bevel gear pairs at the differentialcage, axle gear , slanting geared with break out teeth, measurements: c. 28 x 26 x 25 cm, weight c. 19 kg, condition: used old part (worked up)

No. 4102
demonstration cutaway model of a motorbike control gear KTM-LC4 on a wooden board, with clutch basket and clutch lever and shift lever shaft, features: several cuts (recesses in the case), recesses with unobstructed view to the technology, all switching gear wheels are visible, construction on a wooden board, sizes c. 32 x 25 x 27 cm, weight c. 20 kg, used condition old part (worked up)

No. 4103 SACHS
demonstration cutaway model of a fully automatically passenger car-starting clutch, as hydrodynamic coupling (fluid coupling) by the manufacturer Sachs, cross-section model with several metal cuts (recesses, so that you can see the turbine wheel and the pump wheel), special term: hydrodynamic coupling or Trilok-converter, because of the different colors of the construction parts you can see the functions, sizes c. 32 x 30 x 17 cm, weight c. 18 kg, used condition , old part (was worked up)

No. 4104
demonstration -style-model a all-wheel-transfer gearbox- compensation device (differential compensation device for front axle- and rear axle-drive), installed in the transfer gearbox-powertrain of a four wheel drive vehicle, with all construction parts on a wooden rack, construction: wooden board with standing transmission part, driveshaft for the all-wheel front-axle drive and rear axle gear unit, with separate crank, differential gear-differential in a cage, features: versions of the casting cage (clear view), by the both crancks the drive processes with the effect of the differential between front- and rear axle-drive can be presented, measurements c. 35 x 35 x 46 cm, weight c. 4 kg, used condition, old item (worked up)

No. 4105 BOSCH
demonstration cutaway model of a Bosch-diesel injection pump for a six-cylinder diesel engine with several metal cuts with unobstructed view to the camshaft, pump plunger with pump cylinder, piston spring, injection timing mechanism, etc., features: different colors representations of the pump case, with differentiation of all construction parts, construction on a wood tabletop, sizes c. 42 x 22 x 20 cm, weight c. 13 kg, used condition old part (worked up)

No. 4106 MERCEDES-BENZ
demonstration cutaway model "elektrischer PKW-Anlasser (Schub-Schraub-Starter)" (type Mercedes 220 D), features: construction on a wood-table-board with frame, solenoid switch, starter, excitation winding, sizes c. 39 x 30 x 22 cm, weight c. 19 kg, used condition old part ( worked up, without function), super decoration modell

No. 4107
demonstration -cutaway models (3 pieces), of different tires of passenger cars, commercial vehicles and motorcycle, commercial motorcycle-tyre model: professional construction of the cutaway model original "Nutzfahrzeug-Gürtelreifen" with the presentation of the subsequent tyre components, passenger car-tyre-model: original cutaway model "ULW" (Ultra-Light-Weight-Wheel), two-wheeler tires: original cutaway model of a motorbike tyre, used condition (old part)

No. 4108 BLAUPUNKT
car radio Blaupunkt (Nuremberg) with 6 station push buttons, type designation M14, 1985, with outside-electric-fuse (2 ampere) additionally attachedas new part and station display "LW, MW, FM" wetted with liquid -inside-) working, used condition, with traces of usage

No. 4109
demonstration cutaway model of a passenger car-hydraulic drum brake with fixing braking system/brake lever with mechanical readjustment of the the brake linings with drum brakes anchor plates, unobstructed view to all component of the drum brake, measurements: with a diameter of c. 20 x 8 cm, weight c. 5 kg, used condition (old part)

No. 4110 SACHS
demonstration -cutaway model of a truck chassis hydraulic shock absorber, hydraulic shock absorber for chassis of utility vehicles 2-tube system, piston valves, bottom valves, piston guide and piston seal, features: movement of the piston over a lenght of c. 20 cm, several metal recesses in the case, so you can see the damper technology, with written component description, sizes: lenght c. 50 - 70 cm, variable demonstrably, with a diameter of c. 8 cm, weight c. 5 kg, used condition, old part (worked up)

No. 4111 VOLKSWAGEN/AUDI
demonstration cutaway model of an exhaust turbocharger "KKK-Modell K14", exhaust turbocharger for use at the combustion engine drives of the vehicle manufacturer VW/Audi, with unobstructed view to the whole technology of the inner workings of the turbocharger, manufacturer : Kühnle, Kopp & Kausch, sizes c. 26 x 22 x 26 cm, weight c. 14 kg, used condition old part (worked up), super decoration modell

No. 4112
demonstration cutaway model of a SU-carburetor "MIC" on a metal plate, with the technical data: MIC Mikuni Kogyo: a wealth of case cuts (recesses for unbostructed view to : fuel the air ducts, throttle valve, suction piston, vacuum range), measurements c. 20 x 15 x 18 cm, weight c. 2 kg, used condition old part (worked up), super decoration modell

No. 4113
demonstration models of different hydraulic-brake-components of automobiles (passenger car/truck-master brake cylinder), initial current limiter, etc., as teaching cutaway models of passenger car/truck-hydraulic-brake-component as genuine parts, ATE truck master brake cylinder with hydraulic support, lenght: c. 45 , with a diameter of c. 11 cm, dual circuit-utility vehicle-tandem master brake cylinder as half size cutaway model with movable component, lenght: c. 37 cm, with a diameter of c. 12 cm, colored, can be used for demonstration, used condition, old parts (worked up)

No. 4114 PORSCHE
spiral toothed crown wheel for Porsche RS Spyder (racing version, racing cars), not in working order, used condition

No. 4115
demonstration cutaway model of a passenger car steering racks-steering gear, steering rack pinion with long dimension of the steering input-shaft stub, steering rack-steering gear without gauge rods joint cuff with unobstructed view to the internal track rod joint, by an additional metal cut at the case (recess) you can see the transmission of the pinion with the toothed rod, measurements c. 80 x 23 x 13 cm, weight c. 12 kg, used condition old part (worked up)

No. 4116
mixed lot of 6 different demonstration cutaway models for passenger car wheel rims types with single letterings: light metal and steel rims different kinds, forms, measurements and versions, executed as color cutaway models, rim wheel measurements from 4.5JX15H2 to 6JX14FHH, weight c. 5 kg, used condition, old parts, (worked up)

No. 4117
demonstration cutaway model of a passenger car-rear axle-transmission gear with a cut of the case (independent suspension) on a wooden table frame, manufacturer was probably BMW, wheel flanges: left and right for drive shafts with unobstructed view, engine-gear unit-differential-bevel wheels and ABS-disc with unobstructed view too, measurements c. 62 x 41 x 28 cm, weight c. 34 kg, used condition old part (worked up), decoration modell

No. 4118 VOLKSWAGEN
demonstration -cutaway model of a combined front axle-five-speed-control gear and transmission gear of the passenger car VW golf on a wooden board, five-speed-control gear with reverse gear with the gear wheels pairs and shift-fork, with additionally case cut (recess) unobstructed view, construction: standing on the clutch bell housing on a wooden board, measurements c. 35 x 50 x 52 cm, weight c. 35 kg, used condition/old part (worked up)

No. 4119 VOLKSWAGEN/PASSAT
demonstration cutaway model of a transmission gear/axle drive of a VW passenger car Passat on a wood desk model, also suitable for wall mounting (with drillings), engine power 40 kW, construction year c. 1980, features: a wealth of different metal partial cuts (recesses at the clutch bell housing), all gear unit-shift-gear wheels are visible, weight c. 35 kg, used condition/old part (worked up), super decoration modell

No. 4120 OPEL
demonstration cutaway model of a four-stroke engine with all construction parts, and piston, crankshaft, valves, oil pan, etc. on a wooden rack (cut of a Opel engine, presentation of a single cylinder), features: cylinder head with pipes for cooling water, lever shaft with push rods and valves, crankshaft as cut with piston rod and piston, measurements c. 35 x 35 x 46 , weight c. 25 kg, used condition/old part (worked up), super decoration modell

No. 4121 FORD
demonstration cutaway model of a working passenger car-five-speed-control gear (decoration), because of the detailed metal cut (recesses) unobstructed view to all gear unit gear wheels and shift-forks, shafts, arrangement and shifting options of the gears from outside by a simulated stick shift and circuit diagram sketch, measurements c. 40 x 26 x 36 cm, weight c. 22 kg, used condition/old part (worked up)

No. 4122 PEUGEOT
demonstration cutaway model of a front axle-axle-transmission gear (with helical gearing), with differential-bevel wheels of the transporter Peugeot J5 on a wooden board (can be used as decoration model), metal cut with recess of the axle-gear unit-cage: unobstructed view to the bevel gear-gear wheels of the differential gear (cage), unobstructed view to thespeedometer pinion gear drive, measurements c. 30 x 28 x 28 cm, weight c. 14 kg, used condition/old part (worked up)

No. 4123
demonstration board "Propneumatisches Federungssystem" by the example of the passenger car Citroen CX with a wealth of original hydraulic component as cutaway models and lines to the hydraulic system with detailed letterings and descriptions on a plastic table frame, construction year c. 1980, a wealth of different metal sectional cuts (recesses of the high-pressure pump), wobble plate pump, of different hydraulic valves and the chassis-spring ball-component, used condition (worked up), with storage tracessuper decoration modell

No. 4124
demonstration cutaway model of a passenger car solid axle with drive (rear axle-bevel gear-gear unit) and drive shafts on a wooden table frame, engine gear unit with bevel gear-crown wheel-gear wheels, metal casing-cut (recess), unobstructed view bevel gear, compensating gear , engine-flange, unobstructed view, features: colorwise differentiation of the different construction parts, construction on a wooden rack, sizes c. 144 x 33 x 34 cm, weight c. 30 kg, used condition/old part

No. 4125 MERCEDES-BENZ
original steering wheel for Mercedes-Benz BMW 108/109 with hub, slight traces of usage, otherwise good condition

No. 4126 MERCEDES-BENZ
original steering wheel suitable for Mercedes-Benz W111, slight traces of usage, otherwise good condition

No. 4127 PIAA
mixed lot of 2 rally-additional headlights (Rallye Professional), 1x with plastic cover, with a diameter of c. 19.5 cm, 1x in original packing