Automobilia Ladenburg

Marcel Seidel Auctions

www.automobilia-ladenburg.de - info@automobilia-ladenburg.de - 0049 6203 95 77 870

No. 4102
demonstration cutaway model of a motorbike control gear KTM-LC4 on a wooden board, with clutch basket and clutch lever and shift lever shaft, features: several cuts (recesses in the case), recesses with unobstructed view to the technology, all switching gear wheels are visible, construction on a wooden board, sizes c. 32 x 25 x 27 cm, weight c. 20 kg, used condition old part (worked up)

No. 4103 SACHS
demonstration cutaway model of a fully automatically passenger car-starting clutch, as hydrodynamic coupling (fluid coupling) by the manufacturer Sachs, cross-section model with several metal cuts (recesses, so that you can see the turbine wheel and the pump wheel), special term: hydrodynamic coupling or Trilok-converter, because of the different colors of the construction parts you can see the functions, sizes c. 32 x 30 x 17 cm, weight c. 18 kg, used condition , old part (was worked up)

No. 4104
demonstration -style-model a all-wheel-transfer gearbox- compensation device (differential compensation device for front axle- and rear axle-drive), installed in the transfer gearbox-powertrain of a four wheel drive vehicle, with all construction parts on a wooden rack, construction: wooden board with standing transmission part, driveshaft for the all-wheel front-axle drive and rear axle gear unit, with separate crank, differential gear-differential in a cage, features: versions of the casting cage (clear view), by the both crancks the drive processes with the effect of the differential between front- and rear axle-drive can be presented, measurements c. 35 x 35 x 46 cm, weight c. 4 kg, used condition, old item (worked up)

No. 4105 BOSCH
demonstration cutaway model of a Bosch-diesel injection pump for a six-cylinder diesel engine with several metal cuts with unobstructed view to the camshaft, pump plunger with pump cylinder, piston spring, injection timing mechanism, etc., features: different colors representations of the pump case, with differentiation of all construction parts, construction on a wood tabletop, sizes c. 42 x 22 x 20 cm, weight c. 13 kg, used condition old part (worked up)

No. 4106 MERCEDES-BENZ
demonstration cutaway model "elektrischer PKW-Anlasser (Schub-Schraub-Starter)" (type Mercedes 220 D), features: construction on a wood-table-board with frame, solenoid switch, starter, excitation winding, sizes c. 39 x 30 x 22 cm, weight c. 19 kg, used condition old part ( worked up, without function), super decoration modell

No. 4107
demonstration -cutaway models (3 pieces), of different tires of passenger cars, commercial vehicles and motorcycle, commercial motorcycle-tyre model: professional construction of the cutaway model original "Nutzfahrzeug-Gürtelreifen" with the presentation of the subsequent tyre components, passenger car-tyre-model: original cutaway model "ULW" (Ultra-Light-Weight-Wheel), two-wheeler tires: original cutaway model of a motorbike tyre, used condition (old part)

No. 4108 BLAUPUNKT
car radio Blaupunkt (Nuremberg) with 6 station push buttons, type designation M14, 1985, with outside-electric-fuse (2 ampere) additionally attachedas new part and station display "LW, MW, FM" wetted with liquid -inside-) working, used condition, with traces of usage

No. 4109
demonstration cutaway model of a passenger car-hydraulic drum brake with fixing braking system/brake lever with mechanical readjustment of the the brake linings with drum brakes anchor plates, unobstructed view to all component of the drum brake, measurements: with a diameter of c. 20 x 8 cm, weight c. 5 kg, used condition (old part)

No. 4110 SACHS
demonstration -cutaway model of a truck chassis hydraulic shock absorber, hydraulic shock absorber for chassis of utility vehicles 2-tube system, piston valves, bottom valves, piston guide and piston seal, features: movement of the piston over a lenght of c. 20 cm, several metal recesses in the case, so you can see the damper technology, with written component description, sizes: lenght c. 50 - 70 cm, variable demonstrably, with a diameter of c. 8 cm, weight c. 5 kg, used condition, old part (worked up)

No. 4111 VOLKSWAGEN/AUDI
demonstration cutaway model of an exhaust turbocharger "KKK-Modell K14", exhaust turbocharger for use at the combustion engine drives of the vehicle manufacturer VW/Audi, with unobstructed view to the whole technology of the inner workings of the turbocharger, manufacturer : Kühnle, Kopp & Kausch, sizes c. 26 x 22 x 26 cm, weight c. 14 kg, used condition old part (worked up), super decoration modell

No. 4112
demonstration cutaway model of a SU-carburetor "MIC" on a metal plate, with the technical data: MIC Mikuni Kogyo: a wealth of case cuts (recesses for unbostructed view to : fuel the air ducts, throttle valve, suction piston, vacuum range), measurements c. 20 x 15 x 18 cm, weight c. 2 kg, used condition old part (worked up), super decoration modell

No. 4113
demonstration models of different hydraulic-brake-components of automobiles (passenger car/truck-master brake cylinder), initial current limiter, etc., as teaching cutaway models of passenger car/truck-hydraulic-brake-component as genuine parts, ATE truck master brake cylinder with hydraulic support, lenght: c. 45 , with a diameter of c. 11 cm, dual circuit-utility vehicle-tandem master brake cylinder as half size cutaway model with movable component, lenght: c. 37 cm, with a diameter of c. 12 cm, colored, can be used for demonstration, used condition, old parts (worked up)

No. 4115
demonstration cutaway model of a passenger car steering racks-steering gear, steering rack pinion with long dimension of the steering input-shaft stub, steering rack-steering gear without gauge rods joint cuff with unobstructed view to the internal track rod joint, by an additional metal cut at the case (recess) you can see the transmission of the pinion with the toothed rod, measurements c. 80 x 23 x 13 cm, weight c. 12 kg, used condition old part (worked up)

No. 4116
mixed lot of 6 different demonstration cutaway models for passenger car wheel rims types with single letterings: light metal and steel rims different kinds, forms, measurements and versions, executed as color cutaway models, rim wheel measurements from 4.5JX15H2 to 6JX14FHH, weight c. 5 kg, used condition, old parts, (worked up)

No. 4117
demonstration cutaway model of a passenger car-rear axle-transmission gear with a cut of the case (independent suspension) on a wooden table frame, manufacturer was probably BMW, wheel flanges: left and right for drive shafts with unobstructed view, engine-gear unit-differential-bevel wheels and ABS-disc with unobstructed view too, measurements c. 62 x 41 x 28 cm, weight c. 34 kg, used condition old part (worked up), decoration modell

No. 4118 VOLKSWAGEN
demonstration -cutaway model of a combined front axle-five-speed-control gear and transmission gear of the passenger car VW golf on a wooden board, five-speed-control gear with reverse gear with the gear wheels pairs and shift-fork, with additionally case cut (recess) unobstructed view, construction: standing on the clutch bell housing on a wooden board, measurements c. 35 x 50 x 52 cm, weight c. 35 kg, used condition/old part (worked up)

No. 4119 VOLKSWAGEN/PASSAT
demonstration cutaway model of a transmission gear/axle drive of a VW passenger car Passat on a wood desk model, also suitable for wall mounting (with drillings), engine power 40 kW, construction year c. 1980, features: a wealth of different metal partial cuts (recesses at the clutch bell housing), all gear unit-shift-gear wheels are visible, weight c. 35 kg, used condition/old part (worked up), super decoration modell

No. 4120 OPEL
demonstration cutaway model of a four-stroke engine with all construction parts, and piston, crankshaft, valves, oil pan, etc. on a wooden rack (cut of a Opel engine, presentation of a single cylinder), features: cylinder head with pipes for cooling water, lever shaft with push rods and valves, crankshaft as cut with piston rod and piston, measurements c. 35 x 35 x 46 , weight c. 25 kg, used condition/old part (worked up), super decoration modell

No. 4121 FORD
demonstration cutaway model of a working passenger car-five-speed-control gear (decoration), because of the detailed metal cut (recesses) unobstructed view to all gear unit gear wheels and shift-forks, shafts, arrangement and shifting options of the gears from outside by a simulated stick shift and circuit diagram sketch, measurements c. 40 x 26 x 36 cm, weight c. 22 kg, used condition/old part (worked up)

No. 4122 PEUGEOT
demonstration cutaway model of a front axle-axle-transmission gear (with helical gearing), with differential-bevel wheels of the transporter Peugeot J5 on a wooden board (can be used as decoration model), metal cut with recess of the axle-gear unit-cage: unobstructed view to the bevel gear-gear wheels of the differential gear (cage), unobstructed view to thespeedometer pinion gear drive, measurements c. 30 x 28 x 28 cm, weight c. 14 kg, used condition/old part (worked up)

No. 4123
demonstration board "Propneumatisches Federungssystem" by the example of the passenger car Citroen CX with a wealth of original hydraulic component as cutaway models and lines to the hydraulic system with detailed letterings and descriptions on a plastic table frame, construction year c. 1980, a wealth of different metal sectional cuts (recesses of the high-pressure pump), wobble plate pump, of different hydraulic valves and the chassis-spring ball-component, used condition (worked up), with storage tracessuper decoration modell

No. 4124
demonstration cutaway model of a passenger car solid axle with drive (rear axle-bevel gear-gear unit) and drive shafts on a wooden table frame, engine gear unit with bevel gear-crown wheel-gear wheels, metal casing-cut (recess), unobstructed view bevel gear, compensating gear , engine-flange, unobstructed view, features: colorwise differentiation of the different construction parts, construction on a wooden rack, sizes c. 144 x 33 x 34 cm, weight c. 30 kg, used condition/old part

No. 4125 MERCEDES-BENZ
original steering wheel for Mercedes-Benz BMW 108/109 with hub, slight traces of usage, otherwise good condition

No. 4126 MERCEDES-BENZ
original steering wheel suitable for Mercedes-Benz W111, slight traces of usage, otherwise good condition

No. 4128 PORSCHE/MOMO
racing steering wheel for Porsche racing vehicles from the '80s, type 956/962, by a former mechanic, as good as new from an old stock, with a diameter of 34 cm

No. 4129 PORSCHE
mixed lot with 5 pieces, among it No. 1: race valve with spring package, No. 2: 1x titanium admission valve, No. 3: camshaft sprocket for Porsche Indy engine, No. 4: a water pump wheel for Porsche Gruppe C-engine, No. 5: again a titanium admission valve

No. 4135 BMW
motor sport steering wheel, 3 spokes, BMW Italvolanti, with hub, suitable for the models type E3/E9, with a diameter of 38 cm, slight traces of usage, otherwise good condition

No. 4136 PORSCHE
sport steering wheel/leather steering wheel Raid 13 Dino, 3 spokes, with the part number KBA70155, without hub, slight traces of usage, otherwise good condition

No. 4138 PORSCHE
mixed lot of 21 rubberized clamps, different sizes, used condition

No. 4140 PORSCHE
mixed lot of 40 tube clamps in different sizes and formats, used condition

No. 4141 PORSCHE
mixed lot of 4 rim covers, with a diameter of 8 cm, good condition

No. 4143 PORSCHE
mixed lot with 8 pieces, valves from the racing, among it 6 x 12 cm and 1x 16 cm, different versions, condition as good as new

No. 4144 HELLA
Hella all around-beacon with 2 glasses, 1x color: yellow/1x color: blue, with horn, fastening-sleeve/attaching instruction, used condition

No. 4145 BOSCH
a pair of yellow foglights, suitable for Porsche, Mercedes, etc., with 2 coverings color: black/white with checked pattern, good used condition

No. 4146 PORSCHE/VDO
gas gauge/fuel gauge, part number 34/140001, stamped 551264, with green clockface, with a diameter of c. 6 cm, used condition

No. 4147 PORSCHE
air pump for the folding bicycle for Porsche 911 E 2.2 Targa construction year 1971, used but good condition

No. 4149 BOSCH
Bosch ignition distributor No. 0231129031, Porsche No. 616 602 201 04/06, New Old Stock for Porsche 356B from 1960 till 1963, Porsche 356C from 1963 till 1965, Porsche 912 from 1965 till 1969

No. 4151 PORSCHE
crankshaft with flywheel, suitable for Porsche 930, part number 930 102 233, used condition

No. 4152 BMW/VDO
original speedometer for BMW 327/328 up to 160 kmph, good unrestored original condition.

No. 4153 PIRELLI
advertising banner Pirelli, sizes 330 cm x 60 cm, good used condition

No. 4154 PORSCHE
original rim for Porsche type 906, steel/aluminum, 7x15 from 1965, in good condition for its age

No. 4155 PORSCHE
spring set for Porsche type 906, complete for the front and the back (new)

No. 4156 PORSCHE
2 headlight covers for Porsche type 908/coupé, condition as good as new

No. 4157 PORSCHE
mixed lot of 2 headlamp glasses for Porsche type 911, new, original packaging, for the left hand drive

No. 4160 PORSCHE
suspension arms original for Porsche Indy, made of coal-Kevlar (carbon), used condition

No. 4161 PORSCHE
gasoline cap, c. 100 mm, with flange, good condition

No. 4162 PORSCHE/BLUE
oil filler cap/aluminum, with nozzle (New Old Stock) for different Porsche models, among it 908, 910, 917, 911 RSR, etc.,

No. 4164 PORSCHE
mixed lot with 2 gear cases for Porsche 911 engine, aluminum/polished, used condition